English Articles
24. A study into the effect of loading conditions on the resistance of asymmetric high-speed catamaran based on experimental tests, Hajiabadi A, Shafaghat R, Moghadam HK., Alexandria Engineering Journal, 2017.
23. An empirical evaluation of the sea depth effects for various wave characteristics on the performance of a point absorber wave energy converter, Alamian R, Shafaghat R, Shadloo MS, Bayani R, Amouei AH., Ocean Engineering, 2017; 137: 13-21.
22. An experimental evaluation of the effects of sea depth, wave energy converter’s draft and position of centre of gravity on the performance of a point absorber wave energy converter, Alamian R, Shafaghat R, Bayani R, Amouei AH., Journal of Marine Engineering & Technology, 2017: 1-14.
21. Design Algorithm of a Free Surface Water Tunnel to Test the Surface-Piercing Propellers (SPP): Case Study Water Tunnel of Babol Noshirvani University of Technology, Seyyedi S.M.,Shafaghat R., International Journal of Maritime Technology. 2016; 6: 19-30.
20. Evaluation of methods for reducing the total cost in rural water pumping stations in Iran: a case study, Negharchi SM, Shafaghat R, Najafi A, Babazade D., Journal of Water Supply: Research and Technology-Aqua. 2016; 65: 277-93.
19. Evaluation of the main operating parameters of a homogeneous charge compression ignition engine for performance optimization, Mohebbi M, Abdul Aziz A, Hosseini V, Ramzannezhad M, Shafaghat R., Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2016;1-21.
18. Numerical Investigation on the Effect of Tunnel Height on Drag Reduction in a High Speed Trimaran, Kazemi Moghadam H, Shafaghat R., International Journal of Maritime Technology, 2016; 5: 55-62.
17. Numerical study of various geometries of breakwaters for the installation of floating wind turbines, Esmaeelpour K, Shafaghat R, Alamian R, Bayani R., Journal of Naval Architecture and Marine Engineering, 2016; 13: 27-37.
16. Performance comparison of linear and nonlinear vibration absorbers in aeroelastic characteristics of a wing model, Ebrahimzade N, Dardel M, Shafaghat R., Nonlinear Dynamics, 2016; 86: 1075-94.
15. Experimental evaluation of IRWEC1, A novel offshore wave energy converter, Alamian R, Shafaghat R, Farhadi M, Bayani R., International Journal of Engineering-Transactions C: Aspects. 2016; 29:1292.
14. Numerical simulation of cavitation in mixed flow pump, Vazifeshenas Y, Farhadi M, Sedighi K, Shafaghat R., International Journal of Engineering-Transactions C: Aspects, 2015; 28:956.
13. Numerical investigation of the tunnel aperture on drag reduction in a high-speed tunneled planing hull, Moghadam HK, Shafaghat R, Yousefi R., Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015; 37: 1719-30.
12. Investigation of purge time in cathodic dead-end mode PEMFC, Khazaee Pool A, Shafaghat R, Esmaili Q, Ramiar A., Journal of Heat and Mass Transfer Research (JHMTR), 2015; 2: 13-9.
11. Wall Shear Stress Analysis Using Finite Volume Method for Blood Flow in Irregular Stenotic Arteries, Zanous SP, Shafaghat R, Esmaeili Q., Bioscience and Bioengineering, 2015; 1: 69-84.
10. A Finite-Volume Method in General Curvilinear Coordinates for Simulation of Blood Flow Past a Stenosed Artery, Zanousi S, Shafaghat R, Esmaili Q., International Journal of Advanced Design and Manufacturing Technology. 2014; 7.
9. High-speed planing hull drag reduction using tunnels, Yousefi R, Shafaghat R, Shakeri M., Ocean engineering. 2014; 84: 54-60.
8. Evaluation of technologies for harvesting wave energy in Caspian Sea, Alamian R, Shafaghat R, Miri SJ, Yazdanshenas N, Shakeri M., Renewable and Sustainable Energy Reviews, 2014; 32: 468-76.
7. Turbulent flow analysis and cavitation prediction in axial cooling water pump, Vazifeshenas Y, Farhadi M, Sedighi K, Shafaghat R., The International Journal of Multiphysics, 2013; 6: 365-77.
6. Hydrodynamic analysis techniques for high-speed planing hulls, Yousefi R, Shafaghat R, Shakeri M., Applied Ocean Research, 2013; 42: 105-13.
5. Experimental investigation of turbulent heat transfer and flow characteristics of SiO2/water nanofluid within helically corrugated tubes, Darzi AAR, Farhadi M, Sedighi K, Shafaghat R, Zabihi K., International Communications in Heat and Mass Transfer, 2012; 39: 1425-34.
4. Shape optimization of axisymmetric cavitators in supercavitating flows, using the NSGA II algorithm, Shafaghat R, Hosseinalipour S, Lashgari I, Vahedgermi A., Applied Ocean Research. 2011; 33: 193-8.
3. Derivation of a correlation for drag coefficient in two-dimensional bounded supercavitating flows, using artificial neural networks, Shafaghat R, Hosseinalipour S, Derakhshani S., Archive of Applied Mechanics, 2010; 80: 771-84.
2. Mathematical approach to investigate the behaviour of the principal parameters in axisymmetric supercavitating flows, using boundary element method, Shafaghat R, Hosseinalipour S, Nouri N, Vahedgermi, Journal of Mechanics, 2009; 25: 465-73.
1. Shape optimization of two-dimensional cavitators in supercavitating flows, using NSGA II algorithm, Shafaghat R, Hosseinalipour S, Nouri N, Lashgari I., Applied Ocean Research, 2008; 30: 305-10.